DZ47-4P
KCISE
DZ47-4P
| Quantity: | |
|---|---|
DZ47miniature circuit breaker has short circuit and overload protection function,also can used as an unfrequent transfer andconversion of power system.
| Design according to | IEC/EN 60898-1 |
| Characteristic | B, C, D |
| Rated voltage | AC 230 / 400V |
| Rated frequency | 50/60Hz |
| Rated current | 6,10,16,20,25,32,40,50,63A |
| Rated current interrupting rating | B,C,D curve----6000A |
| Number of poles | 1,1P+N, 2, 3, 3P+N, 4 |
| Endurance | ≥ 20,000 operations |
| Power inlet mode | Upcoming |
| Allowable ambient temperature range | -40ºC~75ºC |
| Per pole width dimension | 13mm |
| Installation method | IEC standard rail 35mm |
| Enclosure protection grade | IP20 |
| Dual function terminals on both sides | Open type / lift type |
| Terminal protection | Finger and hand safe |
| Terminal wiring capacity | 1-25 mm² |
| Terminal screw tightening torque | 2-2.5 Nm |
| Busbar thickness | 0.8-2 mm |
| Installation angle | function is independent of position |
DZ47miniature circuit breaker has short circuit and overload protection function,also can used as an unfrequent transfer andconversion of power system.
| Design according to | IEC/EN 60898-1 |
| Characteristic | B, C, D |
| Rated voltage | AC 230 / 400V |
| Rated frequency | 50/60Hz |
| Rated current | 6,10,16,20,25,32,40,50,63A |
| Rated current interrupting rating | B,C,D curve----6000A |
| Number of poles | 1,1P+N, 2, 3, 3P+N, 4 |
| Endurance | ≥ 20,000 operations |
| Power inlet mode | Upcoming |
| Allowable ambient temperature range | -40ºC~75ºC |
| Per pole width dimension | 13mm |
| Installation method | IEC standard rail 35mm |
| Enclosure protection grade | IP20 |
| Dual function terminals on both sides | Open type / lift type |
| Terminal protection | Finger and hand safe |
| Terminal wiring capacity | 1-25 mm² |
| Terminal screw tightening torque | 2-2.5 Nm |
| Busbar thickness | 0.8-2 mm |
| Installation angle | function is independent of position |
